HBCD 1,2,5,6,9,10-Hexabromocyclododecane

You are here: Home » Products

HBCD 1,2,5,6,9,10-Hexabromocyclododecane

HBCD is mainly used in EPS (Expanded Polystyrene, reference dosage 2% HBCD), PP Fibers (Reference dosage 2% HBCD, 1% Antimony Trioxide), XPS (Extruded Polystyrene). In addition, it also can be used in HIPS, cable, coatings, adhesives, styrene-butadien
OnLine Service:
E-mail Us PDF Download
【Prev Products】 【Next Products】
Comparable Grade 
Chemtura CD-75
Albemarle Saytex HP-900 
ICL FR-1206
Chemical Formula

Molecular Weight 
High amount of alicyclic bromine
Lower loading and reduced effect on physical properties
High solubility in common solvents
Can be used without the addition of Sb2O3
Low melting point provides melt processability
HBCD is mainly used in EPS (Expanded Polystyrene, reference dosage 2% HBCD), PP Fibers (Reference dosage 2% HBCD, 1% Antimony Trioxide), XPS (Extruded Polystyrene). In addition, it also can be used in HIPS, cable, coatings, adhesives, styrene-butadiene rubber, epoxy resin, polyester fiber, acrylic fiber and other polycarbonates.
Item  Specification 
Appearance White crystalline power
Bromine content, % ≥ 74
Melting point, ºC 180 - 190
Specific gravity 224
Hue APHA ≤ 30
Free bromine ≤ 200
Volatile (2h, 110 ºC), % ≤ 0.3
Particle size (μm) According to customer requirement
Solubility (weight % at 25°C)
Solvent  Solubility  Solvent  Solubility 
Water 0.1 Toluene 5
Dichloromethane 2 Butanone 12
Methanol 0.1 Styrene 8
Acetone 8.6 n-Pentane 0.01
Isopentane 0.01 Cyclopentane 0.05
Chlorobenzene 2.8 Dimethyl formamide 33.90
Thermo Gravimetric Analysis (10°C/min, air)
Weight loss, % °C
2 243
5 247
10 249
Standard packing is 25 kg paper-plastic composite bag, or the packaging is in accordance with customer requirements.
Storage and transportation
Handle with care, keep air-tight and dry.
hat kind of raw material is suitable for the Small Pellet Press Machine ?
A: All kinds of biomass waste, such as sawdust, wood branch, straw, coconut shell, corn, straw, grain,soybean and etc.
Any requirements on materials?
A: Ideal size of the raw material should be 1-5mm, ideal moisture of the powder should be 10%-20%
What kind capacity do you have?
A: 40-60kg/h,120-200kg/h, 180-250kg/h, 300-400kg/h, 400-500kg/h and 500-600kg/h,600-800kg/h and etc.
Can I visit your factory, where is your factory located?
A: Yes, sure, welcome to visit our factory at any time, we are in Laizhou city. Shandong province,China
About the installation, can you help us to install them?
A: Yes, sure, we can sent technical personnel to the scene of the on-the-spot guidance equipment installation, debugging and training operators,
Any further question, please be free to contact me by phone, email, etc.

If you have any enquiry about quotation or cooperation,please feel free to email us at sales@creekee.com or use the following enquiry form. Our sales representative will contact you within 24 hours. Thank you for your interest in our products.

  • *Your Name:
  • *Company:
  • *Tel:
  • *Email:
  • Website:
  • *Country:
  • *Message:
  • *Verification Code: Click it